my bike was running rich at the top end (mains were too big), but i was too lazy to take the carbs apart to adjust it, since the bike ran quite well in the lower/mid range, which is what i drive in 80% of the time.
after porting it, they adjusted the jetting correctly, and yeah, gained a significant amount.
im using a sportisi jet kit, that comes with 40 pilot jets, adjustable needles, and a lot of mains to choose from~ i forgot to ask what mains they ended up using this time. its gonna change again shortly, since the bike will get the new pistons, and will have to get re-jetted again, lol
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
|