Yeah did that
Have startup for the ecotrons running good at 43psi of fuel going threw a aeromotive fpr with boost reference never seen anyone using boost reference for a fpr for this and I don’t know why my map and my bov reference will be on the back side of the throttle bodies just getting the plenum welded at the moment went with a 6” long 3.5” tube as the base for the plenum and the air is all 2” going threw a intercooler sized by bell it’s only about 3.5” tall 2” deep and 5” long just to help a lil so as far as I know I have lots of volume to help with surge also it has a billet waste gate on the turbo with replaceable springs starting as small as possible.3 bar have springs all the way to 2bar was going to reference the fpr on the plenum so it doesn’t see vacuum
|