View Single Post
Old August 24th, 2014, 06:55 PM   #154
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
The Wizards of nitrous is set up just a bit different.
Bottle pressure is below 900. Someplace above 800 but not 900. And I have a #80 jet in the nitrous before it splits between cylinders. There is a venom injector nozzle in the manifold


I run from one to five bar of fuel pressure. Currently three bar. No jets but the outlet of the fuel atomizers is. .40 mm. The volume is 30 ml in ten seconds. And I removed all the nitrous delay.

When I go on the dyno I will adjust the nitrous delay and fuel volume to get the event timing so the fuel and nitrous hit together. I am close but I want to watch that. Then watch the exhaust temp and see how the mixture does. Everything is close but I want to double check it and measure things since adding fuel pressure.
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote