ninjette.org - View Single Post

Dave Wolfe · July 29th, 2016, 07:56 AM

I just thought of domething regarding fit. The pregen forks are 36mm while newgen & 300 are 37 if I recall correctly. These valves seal against the inner diameter of the upper fork tube. Im guessing the ID of the pregen forks would be too small for these valves to fit.

The racetech GVE's seem to seal against the upper surface of the damper tube and probably have a large clearance with the fork tube ID.

July 29th, 2016, 07:56 AM	#13
Dave Wolfe CCS Amateur #501 Name: Dave Location: Iowa Join Date: Jun 2015 Motorcycle(s): '09 250 SE 'Booger' Posts: 406	I just thought of domething regarding fit. The pregen forks are 36mm while newgen & 300 are 37 if I recall correctly. These valves seal against the inner diameter of the upper fork tube. Im guessing the ID of the pregen forks would be too small for these valves to fit. The racetech GVE's seem to seal against the upper surface of the damper tube and probably have a large clearance with the fork tube ID.