View Single Post
Old August 11th, 2017, 12:43 PM   #20
gitter
ninjette.org member
 
Name: Joel
Location: Napa, CA
Join Date: Jan 2013

Motorcycle(s): 20' Speed Triple RS - 95 ex250

Posts: 109
Ok here's what I have so far:

1. with key ON, test for power at harness-side connector brown/black wire
12.6V

2. with key ON, test for power at gauge-side connector brown wire
12.3V

3. measure resistance between chassis-ground and harness-side connector black/yellow wire
.2

4. measure resistance between chassis-ground and gauge-side connector black/yellow wire
.3

unplug ECU connector

5. measure resistance between ECU-connector black wire and harness-side connector black wire
.3

6. measure resistance between ECU-connector black wire and guage-side connector black wire
.3

7. measure resistance between ECU-connector black wire and chassis-ground
3.7
gitter is offline   Reply With Quote