Quote:
Originally Posted by gitter
Used 'noid light, worked fine on right cylinder, left cylinder nothing lit up.
Unplugged gauge cluster from harness, still no spark on left cylinder
|
Quote:
Originally Posted by gitter
Just pulled the gauge cluster harness apart didn't see any damaged wires. Time to start pulling the main harness apart?
|
Odd... testing showed there's no short on black wire between ECU/igniter and gauge-connector though.
Where did you hook up 'noid-light? At the coils? Or at the ECU connector? If at ECU connector, then we have bad ECU with no output on one side