Quote:
Originally Posted by choneofakind
^^ sounds like you have a plan.
I would start with 1 washer and add more from there.
Also, make sure you get the needle height first, then drill the slides. Keep the changes to one at a time. It will cause fewer headaches when trying to analyze what changes did what
|
I will do just that, take one thing at a time and see how it effects the bike. I just want to see how the bike was taken care of before I purchased it and see if regular maintinence was kept up on. I am also going to pull the valve cover just to see what everything looks like under there. I have already found several things that was regular maintinence that was not done and I had to fix.