ninjette.org - View Single Post

dodgerdad · November 2nd, 2018, 07:44 PM

Today I bought an over-sized M12 drain plug and some JB Weld to use for the drain hole. I also ordered a used newgen oil screen pan, metal gasket and two long bolts.

I hope to JB weld the new drain plug in the next couple of days and allow it to cure while I wait for the oil screen parts to arrive in the mail.

That's the plan, hopefully this will take care of it. I'll post a follow up with some photos once it's wrapped up.

Thanks again for the assistance, guys!

November 2nd, 2018, 07:44 PM	#12
dodgerdad ninjette.org guru Name: Hector Location: SoCal Join Date: Sep 2018 Motorcycle(s): 2007 Ninja 250 Posts: 272	The plan Today I bought an over-sized M12 drain plug and some JB Weld to use for the drain hole. I also ordered a used newgen oil screen pan, metal gasket and two long bolts. I hope to JB weld the new drain plug in the next couple of days and allow it to cure while I wait for the oil screen parts to arrive in the mail. That's the plan, hopefully this will take care of it. I'll post a follow up with some photos once it's wrapped up. Thanks again for the assistance, guys! __________________________________________________ When you see me, it's already too late.