ninjette.org - View Single Post

teafour · December 3rd, 2017, 04:50 PM

She's coming along and is going to have to be named soon. Tweaked and finished the 2into1 header exhuast today, put some paint on it and finished the exhaust leak with new gaskets. Worked on the jetting and have it pretty well tuned at least until it gets some street time. Tore apart the CBR600F1(Hurricane) wheels to get bearing sizes inside and out and removed the tires. Got measurements off the Yamaha YZF750RR front end including the axle for the merging the wheels and tires. Lots of progression although seems my gas tank has a leak about half way up in the front. Probably shook the rust apart until it leaked. Going to have to buy a gas tank earlier than intended now I'm afraid. All in all, a winning day on the project.

December 3rd, 2017, 04:50 PM	#19
teafour Corner Chaser Name: Thomas Location: Eustis, FL Join Date: Nov 2017 Motorcycle(s): 2006 GSXR1000, 1986 VFR750, 2004 Ninja 250 Posts: 89	She's coming along and is going to have to be named soon. Tweaked and finished the 2into1 header exhuast today, put some paint on it and finished the exhaust leak with new gaskets. Worked on the jetting and have it pretty well tuned at least until it gets some street time. Tore apart the CBR600F1(Hurricane) wheels to get bearing sizes inside and out and removed the tires. Got measurements off the Yamaha YZF750RR front end including the axle for the merging the wheels and tires. Lots of progression although seems my gas tank has a leak about half way up in the front. Probably shook the rust apart until it leaked. Going to have to buy a gas tank earlier than intended now I'm afraid. All in all, a winning day on the project.