Quote:
Originally Posted by BlackyChan91
Yeah, now if only I can find a replacement fuel tank for it due to the previous owner patching a hole with Bondo 🙄🙄
|
.
As Danno said, brazing the hole BUT I had problems with getting the tank to braze. It is very thin metal. What I did was a little body work, make a dimple after cleaned up, grind, get out all the rotted material and I cut a patch piece and epoxied it in there. Made sure it was sealed well and then added body filler, sand, prime and ready to paint.
.
Loctite, JB Weld are good for things like the tank because those epoxies are impervious to chemicals, gas, diesel, etc.
.
.