ninjette.org - View Single Post

Mohawk · February 26th, 2016, 08:28 AM

The quick answer to my question is YES it will. I asked this on another forum last spring, but no feedback lead me to plough my own furrow.

So having put up with the Knock Knock of the old clutch, I finally did some research on a Kawasaki parts site & bought a secondhand 250R clutch basket & hey presto it fits, now the down side is I assumed Kawasaki would only change the basket backing plate to the spring damped one like most bikes have. But they changed the inner basket & the all the plates too ! I asume its a cutback version of a ZX6R with less plates, so I need a whole clutch, which is on order along with a cover gasket & site glass which for some reason cracked !

So if you want to lose that knocking noise from worn clutch bushes that sounds like the big ends are gone, just replace the whole clutch with a 2007-2012 EX250R one

I'll update this when I'm finished.

February 26th, 2016, 08:28 AM	#1
Mohawk ninjette.org guru Name: Chris Location: Bristol, UK Join Date: Feb 2016 Motorcycle(s): ZZR250, VFR800 Posts: 478	Will EX250R clutch fit in EX250 ? The quick answer to my question is YES it will. I asked this on another forum last spring, but no feedback lead me to plough my own furrow. So having put up with the Knock Knock of the old clutch, I finally did some research on a Kawasaki parts site & bought a secondhand 250R clutch basket & hey presto it fits, now the down side is I assumed Kawasaki would only change the basket backing plate to the spring damped one like most bikes have. But they changed the inner basket & the all the plates too ! I asume its a cutback version of a ZX6R with less plates, so I need a whole clutch, which is on order along with a cover gasket & site glass which for some reason cracked ! So if you want to lose that knocking noise from worn clutch bushes that sounds like the big ends are gone, just replace the whole clutch with a 2007-2012 EX250R one I'll update this when I'm finished.