ninjette.org - View Single Post

choneofakind · February 5th, 2018, 07:24 PM

While you're at it... don't just rebuild willy nilly. Figure out why you touched off in the first place.

Lube oil blockage?

Excessive particulate/dirty oil?

Start attempts in the very cold that left the oil film depleted?

Issues with timing of the valves/spark?

I'm just spit balling here, but the suggestion still stands. You probably want to figure out the cause of your problem before repairing the damage from the side effects.

February 5th, 2018, 07:24 PM	#43
choneofakind ninjette.org certified postwhore Name: . Location: . Join Date: Feb 2011 Motorcycle(s): . Posts: Too much. MOTM - Feb '13, Feb '14	While you're at it... don't just rebuild willy nilly. Figure out why you touched off in the first place. Lube oil blockage? Excessive particulate/dirty oil? Start attempts in the very cold that left the oil film depleted? Issues with timing of the valves/spark? I'm just spit balling here, but the suggestion still stands. You probably want to figure out the cause of your problem before repairing the damage from the side effects.
	1 out of 1 members found this post helpful.