Frame Welding -- RearSet Bolt Mount Point (08+ Ninja 250)
Believe it or not, my racebike's rearset bracket is ripping off the frame mount point. It was bending for a while and i thought it was the bolt.
The bike crashed last year on its left side twice at the AFM races. Never saw any cracks before. It used to bend slightly but i thought the knock-off faceplate was weak OR the bolt
Finally this Monday during the last session at Sonoma; my foot slipped off the left peg at the Carousel and the footpeg was bent all the way inside. Later found the threaded section is ripping off
What are my welding options? Weld an aluminium plate on top and drill holes, OR ?
mushroomed_out_both.JPG
mushroomed_out_top.JPG
rearset_bent_outwards.JPG
__________________________________________________
[ex-AFM #828 | SMUSA #828 |
Sponsors : MotionPro | LeoVince | Insurrection Racing Gloves | QstarZ Laptimers
+ OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com
Last futzed with by abhijitz; October 21st, 2013 at 08:30 AM.
|