ninjette.org - View Single Post - Frame Welding -- RearSet Bolt Mount Point (08+ Ninja 250)

jkv45 · October 9th, 2013, 06:25 AM

Can you post a larger photo? I'd like to get a better look at it.

I would hammer the mounts back into proper position and then remove the rearsets. Remove the paint from the surrounding area and clean it all well.

At that point you should be able to run a good size bead around the area with a MIG welder using standard wire (or TIG if you wanted).

The frame is some type of steel, though not Chrome moly (4130).

October 9th, 2013, 06:25 AM	#4
jkv45 Rev Limiter Name: Jay Location: WI Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot. MOTM - Jun '18, Oct '16	Can you post a larger photo? I'd like to get a better look at it. I would hammer the mounts back into proper position and then remove the rearsets. Remove the paint from the surrounding area and clean it all well. At that point you should be able to run a good size bead around the area with a MIG welder using standard wire (or TIG if you wanted). The frame is some type of steel, though not Chrome moly (4130). Last futzed with by jkv45; October 9th, 2013 at 07:59 AM. Reason: typo