An old thread here but I didn't see a pic of where it was mounted in the end. Rather than starting a new thread for mine I figured I would just piggy back off this and post my finished pic...
I just used the sticky tape they include and have on the back of the indicator then routed the wire down the right side of the bike under the fairings and secured with zip ties along the way.
As a small note, when downshifting through the gears, when you shift from 2nd to 1st at a stop (but haven't let the clutch back out yet) the gear indicator will still display 2 (until the clutch is let out again), on my FZ-09 it can tell what gear you are in with the clutch in, this isn't a big deal but just wanted to mention.
Cheers!
