Thread: Your First Mods
View Single Post
Old April 8th, 2011, 10:46 PM   #31
Newguy70
ninjette.org member
 
Newguy70's Avatar
 
Name: Jay
Location: Bangkok
Join Date: Jun 2010

Motorcycle(s): Ninja 250r

Posts: 47
Replace the brake lights, with a brake light that has a clear back housing on the unit, that way the blinkers are visible from all angles. Case in point, I swapped mine out for the .

http://www.rizoma.com/en/products-bi...5c6/zero11.jpg

The number one reason for this was safety, as in Bangkok you have vehicles going in all directions, including lane splitting, oncoming in same lane, etc. These blinkers when activated can be seen from all angles. The same cannot be said for the OEM.
__________________________________________________
YoshiTRCarbonMuffler w/R&GSlider,Hel Brake Lines,RizomaTurnSignals,517RearSet,517Engine Sliders,BikersBarEnds&levers,518LimeWindscreen,Powerlet,Ram,B
Newguy70 is offline   Reply With Quote