ninjette.org - View Single Post

minizoom · February 5th, 2009, 11:21 PM

You don't need a torch to take off the bar ends. A 40 watt soldering will do the trick. Just place the flat tip of the soldering iron on the bolt for 5+ minutes and it will screw right off. I used an infrared temp gun for temp reading of the bolt. I waited till the temp got to 190+ and it just screwed off.

February 5th, 2009, 11:21 PM	#23
minizoom ninjette.org member Name: Alvin Location: Yorba Linda CA - SoCal Join Date: Dec 2008 Motorcycle(s): 09 ZX6R, previous bike owned 08 Ninja 250R Blue Posts: 133	You don't need a torch to take off the bar ends. A 40 watt soldering will do the trick. Just place the flat tip of the soldering iron on the bolt for 5+ minutes and it will screw right off. I used an infrared temp gun for temp reading of the bolt. I waited till the temp got to 190+ and it just screwed off.