At this stage it is just a parts pile. Just starting to mock up. I have some 1/2 inch steel tubing. I held it together with tape just so I can start locating components.
To ride a bike with four times its normal engine output for three miles wide open. I need a cooling system able to handle the heat. I plan to use the nitrous as an inter cooler. And the Fuel system will keep the whole thing from going lean. BUT there is still a huge blow torch going around the exhaust valves and through the exhaust ports. Dissipating the engine hear is critical to running safely.
I am using a larger radiator and mounting it behind the rear seat. I will replace it eventually with a thicker aluminum one as needed. And I am going to use an electric water pump to flow a LOT more than the stock one.
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
|