ninjette.org - View Single Post - Fan doesn't run after some maintenance (had to snip some wires). Diagnostic tips?

DannoXYZ · October 16th, 2019, 10:33 AM

Hmm, interesting. I only see one white/blue wire on diagram. Others are white/green and white/black. There is blue/white wire that goes to headlamp. That might be 2nd-wire on right.

Test for voltage on these:

- fuse box white wire, should have +12v full-time regardless of ignition-switch
- fuse box white/blue wire, should have +12v full-time
- fuse box white/black wire, should have +12v full-time
- white/blue wire at thermoswitch connector, still not sure about this one.

October 16th, 2019, 10:33 AM	#11
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Hmm, interesting. I only see one white/blue wire on diagram. Others are white/green and white/black. There is blue/white wire that goes to headlamp. That might be 2nd-wire on right. Test for voltage on these: - fuse box white wire, should have +12v full-time regardless of ignition-switch - fuse box white/blue wire, should have +12v full-time - fuse box white/black wire, should have +12v full-time - white/blue wire at thermoswitch connector, still not sure about this one. Last futzed with by DannoXYZ; October 16th, 2019 at 07:09 PM.