[Sig99]

Originally Posted by DannoXYZ

Since we’re not building spaceships (yes, I’ve worked for NASA), any basic multimeter from Harbour Freight will do. Check this site for coupons: http://hfqpdb.com

Here’s video on how to use multimeter: https://www.youtube.com/watch?v=SLkPtmnglOI

7. Disconnect input and output wires from both coils and measure resistance:

- between 2 input terminals, should be 2.1-3.2 ohms
- between spark-plug wire output terminal and coil mounting-bolt, should be 10-16k ohms

thanks danno. im out of work around 6 and will pick up a multi meter, and test the coils when i get home. after i test the coils, say they come up good, what to test next? and what numbers will i be looking for? although i have a feeling i may have fried both coils simultaneously id like a list of what to test and how to test it. i have watched a ton of videos on multimeter testing last night. youve been great help so far dan. thank you. hope we can get this ninja running strong!

thank you,

Simon