Quote:
Originally Posted by ShadowStalk3r
Yeah I thought about that as well, so I went back and tried putting the original bolt on the old handle bar and it only turn a few times before it become stuck. I have no idea wth is going on  It was so easy to take out... |
OK so there is just to much lock-tight in the threads or you have damaged the threads getting the original bolt out.
What you need to do is clean and or re-tap the threads with the proper sized tap. 8mm-1.25mm, please can someone confirm the size or I'll double check tomorrow. Just clean out the threads with the tap apply new lock-tight green or blue please not red, and screw it back on.
hope this helps