ninjette.org - View Single Post - 250R NA Build

Racer x · March 29th, 2013, 05:48 AM

I use Amsoil I have been running REPSOL for a number of years.

Break in oil is a good idea. but the procedure is key. I like breaking in the engine on SAE 30. Since the engine will be a street engine. I will assume you are not breaking it in with a dyno. I do this because I can't ride on the street.

http://www.mototuneusa.com/break_in_secrets.htm

I have used this method for years. First people showed me the run it hard but careful method. Then I read this and have used this procedure on all my motors.

First gen crank with stator is 16.25 lb

March 29th, 2013, 05:48 AM	#66
Racer x ninjette.org certified postwhore Name: Eric Location: Iowa City Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot. Blog Entries: 54 MOTM - Sep '18, Feb '16	I use Amsoil I have been running REPSOL for a number of years. Break in oil is a good idea. but the procedure is key. I like breaking in the engine on SAE 30. Since the engine will be a street engine. I will assume you are not breaking it in with a dyno. I do this because I can't ride on the street. http://www.mototuneusa.com/break_in_secrets.htm I have used this method for years. First people showed me the run it hard but careful method. Then I read this and have used this procedure on all my motors. First gen crank with stator is 16.25 lb __________________________________________________ Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja