ninjette.org - View Single Post - 250R NA Build

tubarney · March 31st, 2013, 02:31 AM

I have 1 web to go. The other just need a bit of a touch up to even things out. Then I have to sand and polish them smooth and shinny.

It's like trying to carve stone. Not to mention you have to wait for bits/wheels and of course the crank to cool down as you can't get it hot.

I don't let it get to hot that I can't hold my hand on the web. Meaning it doesn't get hotter than 80C/175F. You have no chance of bending it at this temp. I will still get it checked for straightness when I'm done.

March 31st, 2013, 02:31 AM	#76
tubarney ninjette.org sage Name: Brad Location: Sydney Join Date: Mar 2012 Motorcycle(s): Ninja 250r 2010 SE Posts: 573	I have 1 web to go. The other just need a bit of a touch up to even things out. Then I have to sand and polish them smooth and shinny. It's like trying to carve stone. Not to mention you have to wait for bits/wheels and of course the crank to cool down as you can't get it hot. I don't let it get to hot that I can't hold my hand on the web. Meaning it doesn't get hotter than 80C/175F. You have no chance of bending it at this temp. I will still get it checked for straightness when I'm done. Last futzed with by tubarney; March 31st, 2013 at 05:01 AM.