ninjette.org - View Single Post

jkv45 · October 16th, 2013, 01:41 PM

How does it run wide-open?

Set your idle mixture screws to high highest idle speed, then turn out 1/4. That should put you around 2 1/2 turns out usually.

If wide-open isn't good, your carb (main jet) is partially plugged and needs to be removed and cleaned.

October 16th, 2013, 01:41 PM	#14
jkv45 Rev Limiter Name: Jay Location: WI Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot. MOTM - Jun '18, Oct '16	How does it run wide-open? Set your idle mixture screws to high highest idle speed, then turn out 1/4. That should put you around 2 1/2 turns out usually. If wide-open isn't good, your carb (main jet) is partially plugged and needs to be removed and cleaned.