ninjette.org - View Single Post - Throttle Cable Zip Tie Mod

porschepatrick912 · September 20th, 2009, 08:39 PM

soo just an observation. it may seem as if you are using less energy to achieve WOT but if you know even the most basic theorys about how ratio work, if you do this mod to get the throttle valve to open with less travel at the wrist then there is going to be an increased resistance but it will be minimal. the other observation.. a first gen R6 throttle tube is like 7 or 8 bucks at cycle gear and it drops in, it gives you 1/5 of a turn full throttle.

September 20th, 2009, 08:39 PM	#58
porschepatrick912 ninjette.org member Name: Patrick Location: San luis Obispo Join Date: May 2009 Motorcycle(s): 2004 ninja250r Posts: 17	soo just an observation. it may seem as if you are using less energy to achieve WOT but if you know even the most basic theorys about how ratio work, if you do this mod to get the throttle valve to open with less travel at the wrist then there is going to be an increased resistance but it will be minimal. the other observation.. a first gen R6 throttle tube is like 7 or 8 bucks at cycle gear and it drops in, it gives you 1/5 of a turn full throttle. __________________________________________________ there is no gain without risk