Is it getting a soupy feeling right when you roll off of idle when you try to take off without using much throttle? At 1/16-1/8 throttle, you're in that area of the throttle where the needle taper, needle height, and idle mix are all still having a large effect on the fuel delivery.
A bogging feeling, like I'm pretty sure you're experiencing because I just re-jetted for the 2nd time and I had the same thing going on, is a symptom of rich jetting. I would try taking one washer off the needles; if that bog is still there after that, I would turn the mix screws in about 1/8 turn.
After taking the 5th washer off the needles, does the bike surge when at about 10k with barely enough throttle to keep a steady speed? If it does, put the 5th washer back on. If not, keep it off.
Anyhow,
this is a great page to read for info on jetting.
So it this.