You need a perch from the '94+ model ex500.
http://faq.ninja250.org/wiki/I_want_...6_brake_levers
Read the thread. All the info has been posted.
From earlier in the thread:
Quote:
Originally Posted by vince_2149
I did the ex500 swap on my 250 and it was cake! I think I had a total of $80 into it including levers and the perch.
The brake lever swaps right over. And the perches are easy enough to swap. There's a bushing the original ex500 clutch lever comes with that you will need to put into the new clutch lever. You'll probably have to break off the old perch if you don't want to take off the bar ends/controls. Then the new one just bolts right into place. Here's what everything looked like:
 |