ninjette.org - View Single Post - 1986-87 32mm carburetor jets and needles

Somchai · March 19th, 2016, 08:29 PM

Charlie I think @ducatiman is a good address to talk about carbs.
Maybe here can you could find also some information http://forums.ninja250.org/posting.p...&t=80222&tro=1
Note: "current setting for the cvk32's
main: keihin 112's (most likely best, i will try 115's)
pilot: keihin 38 (staying put)
needle: factory pro 4th groove (i will try one washer under)
fuel screw: 3.5 turns out (i'll try another 0.25-0.5 turns out)
as for "is it more powerful?" i'd have to say yes."

March 19th, 2016, 08:29 PM	#5
Somchai Freedom for Germany Location: This World Join Date: May 2011 Motorcycle(s): Ninja 250R-FI Posts: A lot.	Charlie I think @ducatiman is a good address to talk about carbs. Maybe here can you could find also some information http://forums.ninja250.org/posting.p...&t=80222&tro=1 Note: "current setting for the cvk32's main: keihin 112's (most likely best, i will try 115's) pilot: keihin 38 (staying put) needle: factory pro 4th groove (i will try one washer under) fuel screw: 3.5 turns out (i'll try another 0.25-0.5 turns out) as for "is it more powerful?" i'd have to say yes."