Ok, let's try this different way. Here's flow of +12v from battery to starter solenoid. Measure at each stage and verify +12v exists at that point. When +12v disappears, problem may be previous component.
battery +terminal -> 30a fuse -> W wire -> ignition switch ON -> BR wire -> 10a IGN fuse -> BR/BK wire -> Y/R wire -> stop switch ON -> R wire -> BK/R wire -> start button ON -> BK/R wire -> diode B -> BL wire -> starter circuit relay -> Y/R -> starter solenoid
Last futzed with by DannoXYZ; July 26th, 2018 at 12:05 PM.
|