ninjette.org - View Single Post - Pulling the carbs and doing a valve check.

Bob KellyIII · February 15th, 2023, 07:48 AM

Thanks Jim.... I'll give that a peek next time I go out there... but it dropped to 20 degrees here tonight and it's bitter cold in the shop too cold for even a 5 minute look.... I'll wait till this afternoon.... if I'm awake ! LOL
....
I actually wish I could find the timing off as it would explain it....
but..... i'm not that lucky.
.....
I thought I had sold my RX4 to a guy in Redding... but he decided to buy a KLR instead.... I do hope he is a tall person as those things have a 34" seat height ! that's one of the main reasons I bought the RX4 as it has a 31.5" seat height stock....nothing worse than a bike I can't touch the ground on !
.....
Bob.....

February 15th, 2023, 07:48 AM	#60
Bob KellyIII Retired motorcycle Mc. Name: Robert Location: Weed, California. Join Date: Jul 2021 Motorcycle(s): 2012 Kawasaki Ninja 250R, 2021 CSC TT250, 1977 Triumph Bonneville 750cc,2001 Honda XR650L. Posts: A lot.	Thanks Jim.... I'll give that a peek next time I go out there... but it dropped to 20 degrees here tonight and it's bitter cold in the shop too cold for even a 5 minute look.... I'll wait till this afternoon.... if I'm awake ! LOL .... I actually wish I could find the timing off as it would explain it.... but..... i'm not that lucky. ..... I thought I had sold my RX4 to a guy in Redding... but he decided to buy a KLR instead.... I do hope he is a tall person as those things have a 34" seat height ! that's one of the main reasons I bought the RX4 as it has a 31.5" seat height stock....nothing worse than a bike I can't touch the ground on ! ..... Bob..... __________________________________________________ Its too late when you've gone too far !