ninjette.org - View Single Post - Pulling the carbs and doing a valve check.

Bob KellyIII · February 16th, 2023, 08:10 AM

Well, I just came back in from a 20 degree shop.... Burrrrr !
I did get the valve cover back on and the spark plugs in and the right frame member back on but that is as far as I got....
I think I will stop there as far as re assembly goes and now pull the carbs and see if the main jets are plugged or not.... if they are that should tell me that the fuel system is pirty filthy inspite of the in line filter....
.....
Man I'm still cold... time for a cup of coffee ! LOL
.........
Bob.....

February 16th, 2023, 08:10 AM	#61
Bob KellyIII Retired motorcycle Mc. Name: Robert Location: Weed, California. Join Date: Jul 2021 Motorcycle(s): 2012 Kawasaki Ninja 250R, 2021 CSC TT250, 1977 Triumph Bonneville 750cc,2001 Honda XR650L. Posts: A lot.	Well, I just came back in from a 20 degree shop.... Burrrrr ! I did get the valve cover back on and the spark plugs in and the right frame member back on but that is as far as I got.... I think I will stop there as far as re assembly goes and now pull the carbs and see if the main jets are plugged or not.... if they are that should tell me that the fuel system is pirty filthy inspite of the in line filter.... ..... Man I'm still cold... time for a cup of coffee ! LOL ......... Bob..... __________________________________________________ Its too late when you've gone too far !