|
Or.... if your a cheap O'l man and would rather make it yourself you can....
this is the REFINED version, the first version dropped the bike against the Logan lathe and busted the fairing ! GRRRRR !
...
and Yes I can put it on the stand myself without help, I did it slowly and made sure the forks were lining up on the swing arm and then once I was sure I just put the handle to the floor.
.....
of note I used to thin of angle iron to build this thing... I should have used heavier stuff and I wouldn't have had to add the cross brace !
the 3/4" water pipe I added to each side was to keep it from tipping over again.... it's worked so far !
....
Bob.......
__________________________________________________
Its too late when you've gone too far !
|