Quote:
Originally Posted by greg737
No, in the assembly that I purchased off of Ebay all the springs were tight under their bolts.
Did somebody put washers under some of the spring bolts? (the spring-rate reduction technique discussed earlier in this thread)
|
you might be thinking about the clutch pack compression springs ? I was referring to the damper springs that are inside the basket itself - they are held in place by tabs. Actually now I have re-examined it and I was a bit wrong (did a quick check before the meeting, sorry ), 3 springs have almost 0 play and 3 have about half a millimetre play. Those springs alternate , so they are evenly spaced. It would be strange if they got tired in a such a pattern.