View Single Post
Old January 2nd, 2024, 11:57 AM   #4
Ryan Small
ninjette.org newbie
 
Name: Ryan
Location: Canada
Join Date: Jan 2024

Motorcycle(s): Ninja 250, KX 250f

Posts: 6
Sounds good, I was hoping I wouldn’t have to pull the carbs again but ohh well. At least I got lots of winter months still! I’ll pull them drill the caps and then reinstall. Also should have noted I shimmed the needles up two washers so that may have thrown off the air fuel ratio. The other thing I didn’t realize till after as well was that the needles in the left and right carb were different so I’ll try to make sure I install those in the proper carbs. Thanks for all the help @ducatiman I’ll try to update in a few weeks!
Ryan Small is offline   Reply With Quote