|
Yes the rear will bolt right in, but remember it is a little narrower. The front will also go right in but you will need a spacer to insert where the speedo drive used to be or just keep the speedo drive. Also the 250 front rotor is a 6 bolt versus the 5 bolt on the 300, so you will have to keep the 250 rotor. They seem to be the same size otherwise. Not sure about the caliper mounts, they seem to be in the same position after quick measurement.
__________________________________________________
NESBA 13, 300 Ninja, 250r Ninja, 06 SV650, Ninja ex250, CB350, CL90 ,GT750, Aprilia RS250, Triumph Street Triple R www.mybikeproject.com
|