View Single Post
Old September 14th, 2011, 06:35 PM   #2
1LoneWolf
ninjette.org member
 
1LoneWolf's Avatar
 
Name: R.
Location: San Francisco, CA
Join Date: Jul 2011

Motorcycle(s): 2009 Ninja 250R

Posts: 86
Quote:
Originally Posted by jdoucet93 View Post
Ok so i finally got my bike back together after doing a little carb work and what nots. She runs better than ever! Everything works great and sounds great. Only problem is that my fuel gauge doesn't work now... I reconnected the all the hoses and the plug beneath the tank. The only thing i'm unsure of is the tube that seems to be coming up from right between the carbs, then back, under the tank, and out the side of the bike. I don't remember pulling that hose off of anything when tearing the bike down. But who knows... And also, There seems to be a place for a hose to connect to where the wires for the fuel gauge come out of the bottom of the tank. Not sure if i missed something somewhere or what. Any help would be great! Thanks!
Did you reconnect the fuel gauge sender? It's a green connector.
1LoneWolf is offline   Reply With Quote