ninjette.org - View Single Post

maverick9611 · February 15th, 2019, 07:40 AM

i went 8.5 mm on my cut. dremel with stone is the key. when you start, your adapter should not fit. carefully remove inside near taper till it fits snug. you have use a hose clamp as a stop or the adapter will keep going fwd. works great!
thanx danno

February 15th, 2019, 07:40 AM	#23
maverick9611 "a legend in my own mind" Name: maverick9611 Location: Augusta,Georgia Join Date: May 2017 Motorcycle(s): 2015 moto guzzi norge(brownie),2020 aprilia dorsoduro, Posts: A lot. MOTM - Feb '18	i went 8.5 mm on my cut. dremel with stone is the key. when you start, your adapter should not fit. carefully remove inside near taper till it fits snug. you have use a hose clamp as a stop or the adapter will keep going fwd. works great! thanx danno __________________________________________________ "trying not to get old"