Quote:
Originally Posted by tubarney
here's where to remove the weight on the rods. You will need the new rod bolts in because they can weight as much a 0.1 grams different.
Both the small end and big end need weighing. I suggest you take it down to someone who balances to do. It won't cost much. Maybe $50. If their your mate they will do it for free.
I am measuring the weight of the bearings to make sure everything is as even as possible
|
Falicon did my rods as part of my process.
Its looking good! Now you need to start assembling!
I hope to be done this week or next.