ninjette.org - View Single Post

cookiebug79 · July 14th, 2014, 05:05 PM

My bike only runs on cylinder 1. Cylinder 2 stays cold. I did a compression check and cylinder 2 is at 1/3 compression of cylinder 1. I did a leak down and the valves seem to be ok, so it looks like I'm pulling the engine. I would LOVE a DIY for idiots, just so that I don't skip a step and I make sure I have all my tools lined up.

July 14th, 2014, 05:05 PM	#1
cookiebug79 n00b with the b00bs Name: Jen Location: Southern California Join Date: Jan 2013 Motorcycle(s): 2007 EX250, 2008 EX250, 2001 ZR-7S, 2010 ZX-6R Posts: 470	Is there a DIY on piston rings? My bike only runs on cylinder 1. Cylinder 2 stays cold. I did a compression check and cylinder 2 is at 1/3 compression of cylinder 1. I did a leak down and the valves seem to be ok, so it looks like I'm pulling the engine. I would LOVE a DIY for idiots, just so that I don't skip a step and I make sure I have all my tools lined up.