ninjette.org - View Single Post - Thermo-Bob installation on a Ninja 250

exploring/carolina · October 19th, 2011, 05:12 AM

Thanks,

The overall length of the Thermo-Bob unit is 3.5".
The ThermoBob length is 1.9" not including the nipples.

The overall length of the Tee/Bypass is 2". The Tee/Bypass is .8" not including
the nipples.

Cut the lower radiator hose in half at the 90 degree bend, then cut
3/8" off of each straight end of both hoses to install the 3/4" hose Tee/Bypass.

Cut a section out of the top radiator hose to install the 3/4" hose ThermoBob unit.

October 19th, 2011, 05:12 AM	#3
exploring/carolina ninjette.org guru Name: Bill Location: NC Join Date: Apr 2011 Motorcycle(s): Ninja 250 Posts: 282	Thanks, The overall length of the Thermo-Bob unit is 3.5". The ThermoBob length is 1.9" not including the nipples. The overall length of the Tee/Bypass is 2". The Tee/Bypass is .8" not including the nipples. Cut the lower radiator hose in half at the 90 degree bend, then cut 3/8" off of each straight end of both hoses to install the 3/4" hose Tee/Bypass. Cut a section out of the top radiator hose to install the 3/4" hose ThermoBob unit.