I'm a picture type, so noticed there were no pictures for the tail. Hope this helps someone...
Quote:
Originally Posted by CZroe
Someone else can get you pictures but here's a quick explanation: The tail pieces require you to remove the side panels (two phillips screws-don't even try the ones in the included tool kit)
|
Quote:
Originally Posted by CZroe
and the main seat (two allen bolts).
|
Quote:
Originally Posted by CZroe
Unlock the rear seat
|
Quote:
Originally Posted by CZroe
and you can then remove the four allen bolts on top
|
Quote:
Originally Posted by CZroe
and two on bottom.
|
Finally, I found lifting the center part first (at the key lock) then pulling the rear peg from the rubber plug (not sure technical term), followed by the front peg seems to get the piece off the easiest as it is tight.
And now your bike is truly butt nekkid!
__________________________________________________
<-- Linky
Hey Unregistered! The code [you] shows the username currently logged in.
IBA # 56020 AMA # 521481
Fun Rides! ][
My Videos ][
My Gear
Hold yourself to the same rules you expect others to follow.