|
Honestly idle doesn't matter much. If it idles low when it's hot, lean it a bit. If it's really hard to start, richens it a bit. Idle can actually go pretty lean because there's no load.
But there's also a large window of mix screw position that will give you a decent idle. Just worry about getting the right main jet right now. That's the first step, as main jet size will affect the needle height. Don't mess with needle height until after you've nailed the main jet.
Idk. I find carbs easier than FI. Fi was a headache of numbers and tables to me. Carbs are easy to test once you get a little experience with them. Ymmv.
|