ninjette.org - View Single Post

n4mwd · July 7th, 2013, 04:06 PM

I swapped the CDI earlier on before I swapped the carbs. That was during a no-start condition. Swapping the carbs fixed the no-start problem and I haven't replaced the CDI since. The CDI is not generally sensitive to load, but could be reacting to different voltage levels. I will swap it out again just to be sure.

The plugs are brand new. I'll try the acceleration test you described.

July 7th, 2013, 04:06 PM	#29
n4mwd ninjette.org certified postwhore Name: D Location: Palm Beach, FL Join Date: Oct 2010 Motorcycle(s): 2006 Ninja 250R, 2007 EFI Ninja 250R Posts: A lot. Blog Entries: 1	I swapped the CDI earlier on before I swapped the carbs. That was during a no-start condition. Swapping the carbs fixed the no-start problem and I haven't replaced the CDI since. The CDI is not generally sensitive to load, but could be reacting to different voltage levels. I will swap it out again just to be sure. The plugs are brand new. I'll try the acceleration test you described. __________________________________________________ My Ninja Blog Proud member of ABATE.My NYC Road Rage documentary - CENSORED!