ninjette.org - View Single Post

kvgeorge1 · February 17th, 2019, 06:38 PM

My turn signals are intermittently not working. Turn on the switch and they may/may not work, AND it is getting worse. Someone in another thread mentioned corrosion in the switch and bulb housings. Dielectric grease is easy enough in the housings, but how do I get to the switch? Also, if the switch is bad, how do I replace it? I cannot seem to locate the part online.

February 17th, 2019, 06:38 PM	#1
kvgeorge1 ninjette.org member Name: Ken Location: houston Join Date: Jul 2017 Motorcycle(s): EX250J Posts: 47	Replacing turn signal switch 2008 250R My turn signals are intermittently not working. Turn on the switch and they may/may not work, AND it is getting worse. Someone in another thread mentioned corrosion in the switch and bulb housings. Dielectric grease is easy enough in the housings, but how do I get to the switch? Also, if the switch is bad, how do I replace it? I cannot seem to locate the part online.