ninjette.org - View Single Post - Where can I find OEM 2005 Ninja EX250R Indicator + Mounting Plate

DannoXYZ · February 18th, 2019, 10:41 PM

If plate is in one piece, you can replace just the light part.

Or remove light and shave down remaining stalk base off plate. Bolting flattened plate back onto fairing lets you use many aftermarket lights with backing washer under plate. I've even used rear turn-signals from my VF500 on front of pre-gen this way.

Ebay: https://www.ebay.com/itm/132953103032

February 18th, 2019, 10:41 PM	#4
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	If plate is in one piece, you can replace just the light part. Or remove light and shave down remaining stalk base off plate. Bolting flattened plate back onto fairing lets you use many aftermarket lights with backing washer under plate. I've even used rear turn-signals from my VF500 on front of pre-gen this way. Ebay: https://www.ebay.com/itm/132953103032