|
Pics added. Note that I did NOT make any of the damage on the parts, the previous owner maybe didn't have the right patience and tools and you can see how rounded some of the parts are. Especially that gold colored one in the 1st and 2nd pic. I gently removed it with a smaller screw driver ( not the one in the pic) and screwed back in but not all the way so I can easily take it out when I clean/replace the part. Gaskets look worn out too. The floats do not rise to the same height. 3rd pic, I think it's called a drain bolt but that thing is really rusted so I'm going to have some trouble removing it and will probably just replace them. I am also going to replace the 8 bolts that hold each carb closed so those I'll get at home Depot. I got the size from that Ninja250 org website. The other needles and parts are in good condition and just need a good cleaning but some of the parts do need to be replaced. I took the carbs apart and put all back together but these were the damage concerns that I have. Any feedback?
__________________________________________________
Before life ends, Some people want to climb Mount Everest, some want to go to Disney Land, some people want to visit Paris. Me, I want to ride a motorcycle.
Last futzed with by Ninja Rob; July 23rd, 2019 at 05:13 PM.
Reason: Stupid auto correct on phone
|