ninjette.org - View Single Post

Riickengl · October 28th, 2019, 03:34 PM

I have a 2014 EX300a that I have been slowly replacing the brake system components. I have run into a major issue with the replacement Galfer SS line. I could get any hand brake. I took the caliper off and rebuilt it.. new pads!! No brake!! Took caliper off and shot air into it and the pistons popped out. I then put a vacuum bleeder on it and sucked an entire bottle of fluid through it. No brake!! What have I done? Please help !!!

October 28th, 2019, 03:34 PM	#1
Riickengl ninjette.org newbie Name: Ric Location: Atlanta Join Date: Oct 2019 Motorcycle(s): 14 Ninja 300 Posts: 8	No front brake!! I have a 2014 EX300a that I have been slowly replacing the brake system components. I have run into a major issue with the replacement Galfer SS line. I could get any hand brake. I took the caliper off and rebuilt it.. new pads!! No brake!! Took caliper off and shot air into it and the pistons popped out. I then put a vacuum bleeder on it and sucked an entire bottle of fluid through it. No brake!! What have I done? Please help !!!