|
no I'm saying having the needle one notch off will cause it to run real bad !
the needle will only effect mid range and above in RPM not idle and the reason it won't start is yet to be determined.... more than likely its carb synchronization, air screw adjustment and down right struberness !
everysense I got it it would not idle.... and it is real hard to adjust anything if it won't idle !
.....
if I can get the thing to idle good I can get the thing balanced with the air screws... and that should fix the hard starting issue.
....
Bob.....
__________________________________________________
Its too late when you've gone too far !
|