View Single Post
Old November 8th, 2021, 06:49 AM   #81
Leonardo Lupo
ninjette.org member
 
Name: Leo
Location: Perth, Australia+
Join Date: Oct 2021

Motorcycle(s): 2010 Ninja 250R

Posts: 56
Please solve my bike has a very similar problem!!

Hey,

I have a very similar problem. Just did a carb rebuild and didn't fix it. Mine isn't to bad and bike runs fine in higher rpm.

Mine also got worse! I think it turned out that my fuel tank diaphragm dried out and stuck together, as pulled it apart, unstuck it and it works. Problem is that that tank valve never really worked. Could I grab an expert opinion on this:

on my bike:

When the screw is horizontal (pointing to "ON") and there are no hoses, fuel exits the large port on the valve.

When the screw is pointed down (pointing to "PRI") and there are no hoses, fuel exits the valve. Can't remember which port(s).

I leave my bike on "ON" as this seems logical due to its name. I read above that this valve could cause problems, is that the case?

Cheers
__________________________________________________
Bringing Ninjas to The Outback!
Leonardo Lupo is offline   Reply With Quote