ninjette.org - View Single Post

jkv45 · November 24th, 2021, 07:03 AM

Shim it as much as you can and still get it together.

There doesn't need to be any "slack", just enough to get it assembled.

In case you haven't seen it - https://faq.ninja250.org/wiki/How_to...the_cush_drive

I've used ABS plastic.

Makes a big difference, especially in on/off/on throttle transitions. Much better.

November 24th, 2021, 07:03 AM	#4
jkv45 Rev Limiter Name: Jay Location: WI Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot. MOTM - Jun '18, Oct '16	Shim it as much as you can and still get it together. There doesn't need to be any "slack", just enough to get it assembled. In case you haven't seen it - https://faq.ninja250.org/wiki/How_to...the_cush_drive I've used ABS plastic. Makes a big difference, especially in on/off/on throttle transitions. Much better.